Checking Washer Fluid
Checking Washer Fluid
Check the level of the washer fluid monthly, or more frequently if you use it often.
If the quantity of fluid remaining in the washer reservoir drops below the recommended level, you will receive an alert notification on the Driver Display.
Operate the washers periodically to check that the nozzles are clear and properly directed. If a washer jet performs poorly. See Cleaning Washer Jets.
Topping off washer fluid
WARNING: In temperatures below 4°C (39°F), use a washer fluid with deicer. In cold weather, using a washer fluid without deicer can impair visibility through the windshield.
Note: Some national or local regulations restrict the use of Volatile Organic Compounds (VOCs). VOCs are commonly used as antifreeze in washer fluid. Use a washer fluid with limited VOC content only if it provides adequate freeze resistance for all climates in which you drive.
-
The washer fluid reservoir is located at the base of the windshield. Press to open the cover.
-
Fill the reservoir until the fluid is visible just below the filler neck.
-
Close the cover.
CAUTION: Washer fluid can damage painted surfaces. Wipe up any spills immediately with an absorbent cloth and wash the affected area with water.